Nylon Frame Wall Plug Red 25mm, Pack

A wall plug is the simple bit that lets a screw bite into brick or concrete instead of spinning loose. Drill a hole, push the plug in flush, then drive your screw. The plug squeezes out against the sides of the hole and grips, so your screw holds where bare masonry never would.

This is the red plug at 25mm long. Red is the next size up, a common choice for general fixing screws. The colour tells you the plug size, so match it to the screw you are using and the hole you drill.

Use it for fixing frames, battens, brackets, shelving and fittings to a masonry wall. Drill the hole to suit the plug, push it in until it sits flush, then screw your fixture down. If you are not sure which colour you need, bring your screw in and we will sort it out with you.

Full sizing is in the tabs below.