DIY Know How

How do I hold a glue-up square while it sets?

How do I hold a glue-up square while it sets?

Clamp the glue-up, measure both diagonals until they match, check each corner with a square, then leave it clamped flat while the glue sets.

How do I hold a glue-up square while it sets?

Clamp the glue-up, measure both diagonals until they match, check each corner with a square, then leave it clamped flat while the glue sets.

How do I cut a hole in plasterboard for a power point without a big mess?

How do I cut plasterboard for a power point?

Trace the box, drill a pilot hole, then cut just inside the line slowly with a vacuum beside it. Here's how to check for cables and get a clean fit.

How do I cut plasterboard for a power point?

Trace the box, drill a pilot hole, then cut just inside the line slowly with a vacuum beside it. Here's how to check for cables and get a clean fit.

Which blade do I need to cut through metal with my saw?

Which blade do I need to cut metal with my saw?

For a reciprocating saw, use a bi-metal metal-cutting blade. For a chop saw, use a metal cut-off wheel that matches your saw's size.

Which blade do I need to cut metal with my saw?

For a reciprocating saw, use a bi-metal metal-cutting blade. For a chop saw, use a metal cut-off wheel that matches your saw's size.

‘Austral Head Hoist’ vs ‘line sag disaster’ 👇

Austral clotheslines we order in, and how to pi...

A clothesline is one of those things you don't think about until it sags in the middle of a load, and then it's the most annoying thing in the yard....

Austral clotheslines we order in, and how to pi...

A clothesline is one of those things you don't think about until it sags in the middle of a load, and then it's the most annoying thing in the yard....

How to sand timber properly, grits, grain and t...

Sanding is where a tired bit of timber turns back into a good one. Here is which grit to start on, how to work up, and the mistakes that leave...

How to sand timber properly, grits, grain and t...

Sanding is where a tired bit of timber turns back into a good one. Here is which grit to start on, how to work up, and the mistakes that leave...

How to Make a Rental Feel Like Home Without Losing Your Bond

How to Make a Rental Feel Like Home Without Los...

You can make a rental feel like yours without touching the walls, so here are the reversible changes that shift how a place feels and still come back off.

How to Make a Rental Feel Like Home Without Los...

You can make a rental feel like yours without touching the walls, so here are the reversible changes that shift how a place feels and still come back off.